Wireless DC Controller
Couldn't load pickup availability
Pickup available at Lake Lifter
Usually ready in 24 hoursPairs well with
Wireless DC Controller
Replacement Wireless Controller for Lake Lifter Air Displacement Boat Lift Motors
The Wireless DC Controller is the direct replacement for the wireless control unit on Lake Lifter Air Displacement boat lift motors. Designed specifically for the 12V and 24V DC blower-motor systems that power air-displacement lifts, the controller restores hands-free, push-button operation of the lift cycle from anywhere on the dock without running new wiring or pulling out the existing motor assembly.
Built around the same control architecture as the original Lake Lifter wireless unit, this replacement is a one-to-one swap that mates with the existing low-voltage harness, blower motor leads, and valve switching on your air-displacement system. Pull the old controller, drop in the new one, pair the remote, and the lift returns to full wireless operation.
Wireless
Remote-paired control
12V / 24V DC
Low-voltage compatible
1-to-1 Swap
Drop-in replacement
Marine Grade
Weather-sealed housing
Engineered For
Lake Lifter Air Displacement Boat Lift Motors (DC)
Designed for low-voltage 12V and 24V DC blower-motor systems on air-displacement boat lifts. Direct replacement for the original Lake Lifter wireless DC control unit.
Remote Stopped Working
The wireless remote no longer triggers the blower motor or valves on the lift.
Controller Damage
The original DC controller has taken water, surge damage, or physical impact and needs full replacement.
Aging Unit
The original controller has aged out and a preventive replacement is the right call.
Restore Wireless Operation
Bring back hands-free remote control without rebuilding the rest of the lift system.
Hands-Free Wireless Operation
Pair a remote and run the lift from anywhere on the dock or the deck. The blower motor inflates and vents on command without trekking back to a wired switch every cycle, which is the whole point of running a wireless control on an air-displacement system.
12V and 24V DC Architecture
Designed for the low-voltage DC blower motor systems Lake Lifter air-displacement lifts use, including off-grid and solar-charged installs. Safe low-voltage operation with the wiring already in place on your existing setup.
One-to-One Drop-In Replacement
Built around the same control architecture as the original Lake Lifter wireless DC controller. The new unit mates with the existing low-voltage harness, blower-motor leads, and valve switching, so the swap is a clean retrofit instead of a system rebuild.
Marine-Grade Weather-Sealed Housing
The enclosure is built for waterfront life. Weather-sealed against moisture and UV exposure, the controller stays operational across full seasons of dockside service in both freshwater and saltwater conditions.
Pair, Power Up, Run
The install is the kind that gets a lift back online in minutes, not hours. Pull the old controller, swap in the new one, pair your wireless remote, and the system is ready to run the lift cycle the way it did out of the box.